TemuTemu

€2 per declaration line fee: how many distinct references should you include in each import order

Team at AiToolsForAppsWritten with AI assistance14 min read

In summary

  • From November 1, 2026, the EU charges a Union management fee of €2 for each declaration line (each category of item), with no value cap: it is also paid on orders over €150, according to the Delegated Regulation (EU) 2026/2152 published on October 22, 2026.
  • This €2 is added to the flat tariff of €3 per line that has been in effect since July 1, 2026 for shipments up to €150, a transitional measure that expires on July 1, 2028.
  • Practical result for a lot of less than €150: €5 fixed for each distinct reference, regardless of whether that reference has 1 unit or 40.
  • The same outlay of €120 spread over 10 references × 2 units pays €50 in customs; in 2 references × 10 units pays €10. That’s €2.50/unit versus €0.50/unit.
  • The rule of thumb: minimum units per reference = €5 ÷ the margin per unit you are willing to concede. If you concede €0.50/unit, you need 10 units of that reference.

If you buy small lots on Temu, AliExpress, or Alibaba to resell in your store, on Wallapop, Vinted, Facebook Marketplace, or eBay, the change from November 1, 2026, does not raise the price of the goods: it changes the way the customs invoice is structured. Previously, the variable cost dictated the terms; now a fixed cost per reference takes precedence, which is indifferent to the product's value. This article does that arithmetic with unit numbers, without tax advice: just the calculations. And because these calculations repeat with every order, at AiToolsForApps we set up aiTemu, with an import cost and resale margin calculator to avoid recalculating them manually.

Ten distinct references with two units each, separated on a wooden table, each pair with its own white label
Ten distinct references with two units each, separated on a wooden table, each pair with its own white label

What exactly is the €2 per declaration line fee?

It is a Union management fee of €2 charged for each category of item —each line— of a declaration for distance sales imports from outside the EU, regardless of the shipment value. It was established by the Delegated Regulation (EU) 2026/2152, published in the Official Journal on October 22, 2026, and applicable from November 1, 2026. It is not a tax on the product: the Commission justifies it as the approximate cost of data verification services, risk analysis, controls, and customs infrastructure.

Three features that make it distinct from everything before:

  • It is per line, not per package. A pen, a notebook, and a keychain in the same box are three items and incur a fee of €6, according to the Taric breakdown of the management fee.
  • There is no value threshold. The flat tariff of €3 only applies to shipments up to €150; the €2 fee is also paid above €150, where the normal product tariff also applies.
  • It is non-refundable. Taric states that the fee is not refunded even if the goods arrive defective or are returned. A reference that you do not sell does not recover what was paid for its existence in the declaration.

Add the timeline and it becomes clear that it is not a temporary spike: the €3 tariff is transitional until July 1, 2028, but the €2 fee is permanent.

MeasureAmountCharging UnitFromToValue Cap
Transitional flat tariff€3Line / category of itemJul 1, 2026Jul 1, 2028Shipments ≤ €150
Union management fee€2Line / category of itemNov 1, 2026PermanentNo cap

Sources: Taxually on the management fee and the €3 tariff and the tariff and fees sheet for low-value shipments from Correos, which sets the tariff at "€3.00 per declared line or article contained in a shipment" and the fee at "€2 per product category".

Why does this structure penalize the "varied" order?

Because the customs cost no longer depends on how much you buy, but on how many different boxes you spread it across. Each new reference opens a line and that line costs €5 in a shipment of less than €150, whether it carries two units or forty. The order "to try a bit of everything" —ten different things, two of each— multiplies by ten a cost that a concentrated order pays twice.

Said in reverse: the marginal cost of the eleventh unit of a reference already in the declaration is zero in customs terms. The marginal cost of the first unit of a new reference is €5. That asymmetry is the entire purchasing decision.

The same money, two orders: 10 references × 2 units versus 2 references × 10 units

With €120 of merchandise and 20 units in both cases —€6.00 per unit—, the varied order pays €50 in customs and the concentrated order €10. This turns €6.00 of purchase cost into €8.50 or €6.50 depending on how it is distributed, with identical merchandise and the same carrier.

ConceptA — 10 references × 2 unitsB — 2 references × 10 units
Total units2020
Merchandise€120.00€120.00
Purchase cost per unit€6.00€6.00
Declaration lines102
Flat tariff (€3/line)€30.00€6.00
Management fee (€2/line)€20.00€4.00
Fixed customs cost€50.00€10.00
Markup on merchandise+41.7 %+8.3 %
Customs per unit€2.50€0.50
Cost per unit (merchandise + customs)€8.50€6.50

The €40 difference buys nothing: it is the price of variety. In a batch of €120, it amounts to a third of the outlay.

Two unique references grouped in ordered blocks, each block with a single white label
Two unique references grouped in ordered blocks, each block with a single white label

How much fixed cost does each unit absorb according to units per reference?

The customs cost per unit is a simple division: €5 ÷ units of that reference in shipments up to €150, and €2 ÷ units above €150, where the flat tariff no longer applies. The curve drops quickly at first and then flattens out: the significant jump is between 1 and 5 units, not between 20 and 50.

Units per referenceShipment ≤ €150 (€5/line)Shipment > €150 (only €2/line)
1€5.00€2.00
2€2.50€1.00
3€1.67€0.67
5€1.00€0.40
10€0.50€0.20
20€0.25€0.10
50€0.10€0.04

Be careful not to read the right column as a bargain: above €150, the flat tariff of €3 disappears, but the normal product tariff comes into play, which is a percentage of the value and can comfortably exceed those €3. The column only isolates what the line itself costs.

How does the minimum selling price change?

For the same target gross margin of 40 %, the varied order forces a price of €15.67 per unit and the concentrated order €12.33: a difference of €3.34 on the shelf due to a decision made in the cart. If you sell on a marketplace that takes a 10 % cut, the gap widens to €3.71.

Starting from the previous example and adding €18 for shipping the batch (€0.90/unit, identical in both scenarios, so it does not distort the comparison):

ConceptA — 10 ref × 2 unitsB — 2 ref × 10 units
Merchandise per unit€6.00€6.00
Shipping per unit€0.90€0.90
Customs per unit€2.50€0.50
Cost delivered to home€9.40€7.40
Minimum price with 40 % gross margin€15.67€12.33
Minimum price if the channel charges a 10 % commission€17.41€13.70

Those three euros and change decide matches on Wallapop or Marketplace, where the buyer compares with the same product offered by another seller who concentrated their order. And there is an accounting detail that worsens scenario A for those selling to individuals: both the €3 tariff and the €2 fee are part of the taxable base for VAT. The Commission rectified its initial criteria and confirmed that the fee follows the same regime as the tariff for VAT base purposes, so VAT is also paid on them.

Reseller's workspace with calculator, notebook, and a box on the parcel scale
Reseller's workspace with calculator, notebook, and a box on the parcel scale

From how many units per reference does margin return?

First, decide how many cents of margin per unit you are willing to give up to customs and divide: minimum units = €5 ÷ that margin. If you are willing to give up €0.50 per unit, the reference does not drop below 10 units; if you only accept to give up €0.25, you need 20.

Margin you give up per unitMinimum units (€5/line)Minimum units (€2/line)
€0.105020
€0.25208
€0.50104
€1.0052
€2.5021
€5.0011

The same calculation can be posed on the purchase price instead of the margin. If you want customs not to weigh more than 5 % of the purchase cost of the item, the minimum is €100 ÷ purchase price:

Purchase price per unitMinimum units for customs to weigh ≤ 5 %To weigh ≤ 10 %
€25025
€52010
€10105
€2053
€5021

From there comes the uncomfortable conclusion for the reseller of cheap items: with products priced at €2 and €3, any reference below 25 units is affected. The cheap item in small quantities is precisely what this cost structure leaves out of play.

What counts as "a line" is not always what you call "a reference"

A line groups goods from the same shipment that share tariff classification and origin, not the SKU from your spreadsheet. Five identical t-shirts are one item and pay €3; one t-shirt and one watch are two and pay €6, in the example used by Taxually. This means that several of your variants can fall into the same line, and that two things that seem "the same" to you can fall into different lines.

The level of grouping depends on the type of declaration used by the person dispatching your shipment, and you don't always choose it:

DeclarationLevel of groupingPractical effect
H7 (simplified)6-digit headingGroups more: several variants fall into a single line
H6 (postal)Combined nomenclature 8-digitIntermediate
H1 (standard)10 digits, strict separation of linesBreaks down more: more lines, more fees

Source: breakdown of Taric declaration levels.

Two consequences for your shopping list:

  1. Variants of the same product are often one line. Ten cases of the same model in five colors share classification: one line, not five. Varying color or size is cheap; varying product is what costs €5.
  2. Asking about the type of declaration is no longer a curiosity. The same batch dispatched in H7 or H1 can generate a different number of lines and, therefore, a different customs invoice.

Since November 1, 2026, there is also a requirement that helps ensure that classification is not improvised: product identifiers (PID) are mandatory for low-value shipments —seller reference, manufacturer reference, and a standardized identifier like GTIN, EAN, UPC, or ISBN when available—, and incomplete information can delay dispatch.

How we got here: the end of the €150 exemption

The change in November is the second step of a reform that began with the elimination of the €150 customs exemption. Regulation (EU) 2026/382, published in the Official Journal on February 18, 2026, according to the Iberley sheet on the end of the threshold exemption, ended the exemption that had allowed shipments below that amount to enter without tariffs for years.

The sequence, in four dates:

  1. February 18, 2026 — the regulation that eliminates the €150 exemption is published.
  2. July 1, 2026 — the exemption disappears and a flat tariff of €3 per line on shipments up to €150 is introduced as a temporary solution until the new customs model is operational.
  3. November 1, 2026 — the management fee of €2 per line applies, with no value cap, and PIDs become mandatory.
  4. July 1, 2028 — the flat tariff of €3 expires and normal tariffs return product by product. The €2 fee remains.

For the small reseller, the calendar reading matters: between today and July 2028, the fixed cost per line is €5, and from then on it will be €2 plus the actual tariff of the product. The penalty for fragmented orders decreases, but does not disappear.

Six purchasing decisions that change with this structure

What follows is not tax or customs advice: it is what is deduced from dividing €5 by the number of units.

  1. Choose references, not products. Before adding to the cart, ask yourself if you are going to buy at least the minimum units of your table. If not, the reference is unnecessary.
  2. Turn the "test order" into a single test order. Testing ten products at once costs €50 in customs. Testing one with 10 units costs €5.
  3. Group the orders of the month into one. If you are going to restock three references that you already sell, they go together: one line each, not one line in each shipment.
  4. Vary within the reference, not between references. Colors and sizes of the same product usually share a line; different products do not.
  5. Review the price floor of your cheap items. With products of €2 and €3 purchased in small quantities, the cost per line can exceed the entire margin.
  6. Count the return as a sunk cost. The fee is not refunded even if you return the goods, so a failed reference also loses what it paid to exist in the declaration.

Frequently Asked Questions

Do I pay the €2 fee per package or per product?

By declaration line, that is, for each category of item in the shipment. A package with three different products pays the fee three times; a package with twenty units of the same product pays it only once.

Will I be charged the €2 if the order costs more than €150?

Yes. The management fee has no value threshold and applies even above €150. What disappears above that amount is the flat tariff of €3, replaced by the normal tariff corresponding to the product.

How much does a new reference cost in a small order?

In a shipment of up to €150, €5 fixed: €3 for the flat tariff plus €2 for the management fee. VAT is also calculated on those amounts, as both are part of the taxable base.

If I buy 30 units of the same item, do I pay the fee 30 times?

No. Goods that share customs classification and origin count as a single item, so 30 identical units pay the tariff and the fee only once.

Do different colors or sizes of the same product count as separate references?

Normally not, because they usually share customs classification. However, the final number of lines depends on the type of declaration with which the shipment is dispatched (H7, H6, or H1), which group 6, 8, and 10 digits respectively.

If I return the product, will I get the fee back?

No. Taric expressly states that the management fee is non-refundable, even when the merchandise is defective or returned.

How many units per reference make it worthwhile to buy?

Divide the €5 cost per line by the margin per unit that you are willing to give up. If you give up €0.50 per unit, the minimum is 10 units; if you give up €0.25, it is 20. To ensure that customs does not weigh more than 5% of the purchase cost, the minimum is 100 divided by the unit purchase price.

Does this affect Temu, AliExpress, and Alibaba equally?

The rule does not distinguish by platform: it affects distance sales of imported goods to the EU from third countries. What changes between platforms is who declares and whether the fee appears in the cart or is claimed by the carrier upon delivery.

What to take to your next order

The €2 fee per line does not increase the cost of goods: it increases the variety. As long as the fixed cost per reference is €5 —until July 2028—, each new product you add to the cart must justify that €5 with enough units to dilute them. Ten references with two units each are today an expensive order for the same as two references with ten units.

The complicated part is not the formula, which is a division: it is recalculating it in each cart, with each purchase price and each freight charge. For that, there is aiTemu, the tool from AiToolsForApps designed for those who buy lots and resell: an import cost and resale margin calculator where you enter your own numbers —what you pay, how many units, and how many references— and see the cost per unit and the minimum price before confirming the order, not after receiving it.

Calculate your next order before paying: enter the cost of the goods, how many units you are buying, and how many distinct references, and see the cost per unit and the minimum selling price with the fee per line already included. Try the aiTemu calculator.

Calculate your next order before paying: enter the cost of the goods, how many units you are buying, and how many distinct references, and see the cost per unit and the minimum selling price with the fee per line already included. Try the aiTemu calculator.

↑ Back to top